|
 |
-
THE SHELTER |
|
|
UniFold means:
| Fast! |
Up in
as little as 45 seconds, down just as fast. |
| Light! |
10 X14
weighs just 84 lbs. |
| Safe! |
Integral
floor and non-porous material stay clean and
dry. |
| Simple! |
Totally
integrated one piece ShelteX model requires
no assembly or instructions. |
| Affordable! |
Purchase
shells direct from the factory, systems and
solutions directly from our total system integrators. |
UniFold
also means flexible.
Because the UniFold design
is based on an ingenious folding structure, it's
modular, and can combine to make compact integrated
encampments, or long mass processing tunnels. Whatever
suits your particular need, all at a price that's
revolutionary.
|
You won't find a better value in a fast set-up shelter for
these uses:
| Emergency
Response |
Military |
Commercial |
| First
aid stations |
Checkpoints |
Event
Promotions |
Makeup
Rooms |
| Decontamination shelters |
Rapid
deployment |
Temporary
Clean Rooms |
Shower
& Toilet Rooms |
| Modesty
shelters |
Command
posts |
Vending
carts |
Resting
Rooms |
| Staff
Quarters |
Weatherproof
Storage |
Vehicle
storage |
Exibit
Room |
| Vaccination
Stations |
Equipment
stations |
Site
Change Rooms |
Site
Office Room |
| Encampments |
Event
Promotion |
Semi-Permanent
Storage |
|
How
do we do it?
| By combining
a unique material with a novel folding process we
eliminate the need for a frame of any sort, saving
time and money, and the need for complicated training
or instructions! |
UniFold designs with safety
as the highest priority.
 |
Cautions and
instructions are decaled on the shelter so you'll
never lose them. |
|
Anchoring
pegs and ropes are included with every unit to make
tie-down fast and easy. |
|
Floor vents
provide both air exchange ventilation and drainage
for interior spills. |
|
Plastic material
will not absorb liquids, allowing for cleanest field
conditions possible. |
|
PATENT PENDING
FireSafe (ShelteR model only) end wall fasteners keep
the structure and allow fast escape if interior contents
catch fire. |
Unsurpassed
field hygiene - cleans-up in seconds!
Dries with a sponge wipe!
 |
Fit
and finish are closely controlled in our ISO9001
certified facility. You can rely on our standards
of quality and performance meeting or exceeding
your expectations.
These standards are key to easy set-up and knock-down.
Our patent pending assembly process uses captive
mechanical clips  to
hold the end walls in place. Fast, easy, and
absolute, you'll soon love these little clips!
Need something faster? Upgrade to the ShelteX™
model. No need for assembly or clips or parts
to lose of any sort. It sets up in 45 seconds |
|
 |
Witness
our product development wind test. This picture
was taken with a hand held wind meter reading
72.1 mph. At that point the guy lines broke
and the shelter collapsed.
Not to worry, we set it up again! |
|
 |
| A full
size car fits with room to spare. Open the hood,
open the doors. Spill oil on the floor? Not
to worry, wipe it clean! |
|
 |
| With
shoes, this guy is 6'4" and 200 lbs. He's fixing
on cutting a hole in the floor and putting it
over his hot tub… that is, as soon as he gets
a hot tub. |
|
 |
| This
is with 4" of wet March snow. Notice the side
guys are not in tension, as they are not structural.
The front and back guys are in tension and are
required to keep the roof straight under load.
Without the tension the snow would cause the
roof to sag like a saddle.
|
|
 |
Snow
and ice don't like to accumulate on the slippery
roof. Even when they stick, the roof holds up
to 5 pounds per square foot, which can be doubled
with the snow load option.
Heat the interior with any approved tent heater.
|
|
|
|
You
are visitor number : 
|
|
|
E-
mail: